|
Binding the Quilt
Join binding strips on short ends with diagonal seams to make one long strip; trim seams to 1/4" and press seams open (Figure 4). |
 |
Fold 1" of one short end to wrong side and press. Fold the binding strip in half with wrong sides together along length, again referring to Figure 4; press.
Starting about 3" from the folded short end, sew binding to quilt top edges, matching raw edges and using a 1/4" seam. Stop stitching 1/4" from corner and backstitch (Figure 5). |
 |
Fold binding up at a 45-degree angle to seam and then down even with quilt edges, forming a pleat at corner, referring to Figure 6. |
 |
Resume stitching from corner edge as shown in Figure 6, down quilt side, backstitching 1/4" from next corner. Repeat, mitering all corners, stitching to within 3" of starting point.
Trim binding end long enough to tuck inside starting end and complete stitching (Figure 7). |
 |
Fold binding to quilt back and stitch in place by hand or machine to complete your quilt. |
|
|
|
|
