Your browser is outdated. Upgrade to a modern browser to better experience this site.

Spinning Centers to Reduce Bulk

Tutorial Guides

When sewing a block where numerous points meet together, there can be a lot of “bulk” in the seam allowance on the wrong side of the fabric. This extra bulk prohibits the block from lying flat when pressed. One option is to trim the points off, thus reducing the amount of fabric in the seam allowance. Another option is to “spin” the center of the seam allowances, thus distributing the bulk more evenly.
1. Stitch the block as usual nesting seams at any intersection (Photo A).

Spinning Centers to Reduce Bulk
2. Before pressing, remove approximately three stitches in the seam allowance from each side of the previously sewn seams (Photo B).

Spinning Centers to Reduce Bulk
3. Place the block on a pressing board right side down (Photo C).

Spinning Centers to Reduce Bulk
4. With your finger, push the top seam to the right and the bottom seam to the left (Photo D). This will result in the seam allowances spinning in a clockwise direction.

Spinning Centers to Reduce Bulk
5. The center will pop open and the seam allowances will swirl around the center of the block. Press with an iron to flatten the seam allowances in place.

Spinning Centers to Reduce Bulk
Spinning Centers to Reduce Bulk
Learn